Types and characteristics of rotomolding machines

Rotational moulding machine is a more reasonable choice (Select) for many plastics (structure: synthetic resin, plasticizer, stabilizer, pigment). It has many advantages and performances (xìng néng). Suitable for different production needs, let’s take a look at the types and characteristics of rotomolding machines.
1. Shuttle type double-arm rotational moulding (rotational moulding) machine, comb-through double-arm equipment is a linear combination, the middle is the combustion chamber, the two sides are the cooling chamber and the loading and unloading are integrated, when one side of the rotary arm mold is heated in the oven , The other side stops outside to cool or load and unload, the operation is flexible, and the availability of the combustion chamber is high.
2. Open flame heating direct-fired rotary moulding machine, direct-fired swinging equipment (shèbèi) is the method of heating through the up and down, left and right rotation (rotate) of the mold (title: mother of industry), and directly heated by the open flame To complete the production (Produce) production (Make), the equipment cost (Cost) is low, and it is suitable for manufacturing large or super large plastic (structure: synthetic resin, plasticizer, stabilizer, colorant) products.
3. Independent dobby rotational moulding machine The independent dobby rotational moulding equipment is mounted on its relatively independent turntable by multiple arms, and the turntable can rotate independently and freely around a center, so that one arm enters the next The job station will not affect the position of other arms and the processing process. The independent arm configuration (deploy) is more flexible in the forming process.
4.Turret type dobby rotational moulding (rotational moulding) machine, turret type equipment (shèbèi) has multiple arms that can carry molds on a turntable, and circumfuse a center point on the job station Cycle (continue) work. Because the machinery arm is on a turntable, this equipment is suitable for producing products with consistent product processing cycles.


Post time: Jun-21-2021